September, 2011

Allied Telesyn Compatible 1000Base-T SFP Copper Transceiver

September 26th, 2011 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the release of its Allied Telesyn Compatible 1000Base-T SFP Copper Transceiver designed for high performance integrated full duplex data link at 1.25 Gbps over four pair Category 5 UTP. It is widely used in switch to switch interface, router/server interface, Gigabit Ethernet converter and switched backplane applications.

This small form factor copper transceiver, model C013P101, is compliant with SFP Multi-Source Agreement (MSA) specification and complies with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std. 802. 3. It boasts a transmission distance of up to 100 m over unshielded twisted pair (UTP) Category 5 Cable.

With hot pluggable ability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operation.  The transceiver provides standard serial ID information compatible with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. In addition, the physical IC can also be accessed via 2-wire serial bus at address ACh.

This Allied Telesyn compatible 1000Base-T SFP cooper transceiver belongs to GAO’s family of Allied Telesyn compatible optical transceivers. This line includes a wide variety of Allied Telesyn compatible transceivers such as Allied Telesyn Compatible 1000Base-T GBIC Copper Transceiver, Allied Telesyn Compatible 1000Base-LX GBIC Transceiver which operates at a wavelength of 1310 nm and is designed for single-mode fiber and Allied Telesyn Compatible 100Base-FX SFP Transceiver which boasts a long transmission distance of up to 2 km over multi-mode fiber (MMF). GAO’s pluggable transceivers offer a convenient and cost effective solution for use in data centers, metropolitan area access and ring networks, and storage area networks.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

D-Link Compatible 1000Base-SX GBIC Optical Transceiver

September 20th, 2011 Posted inGAO Comm News

Toronto, Canada – GAO Comm is offering its D-Link Compatible 1000Base-SX GBIC Optical Transceiver designed for WDM Gigabit Ethernet, fiber channel links and other applications.

This hot-pluggable D-Link compatible 1000Base-SX GBIC optical transceiver, model C016G102, provides up to 1.25 Gb/s bi-directional data links and operates at the wavelength of 850 nm. It consists of two sections: the transmitter section incorporates a VCSEL laser and the receiver section uses an InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Compliant with the GBIC Specification Revision 5.5 and Gigabit Ethernet standard as specified in IEEE 802.3z, it boasts a transmission distance of up to 550 m over multi-mode fiber. In addition, a 20-pin connector is used to connect the converter to the host system.

This D-Link Compatible 1000Base-SX GBIC Optical Transceiver belongs to GAO’s family of D-Link Compatible Transceivers. The line provides a full range of transceivers such as D-Link Compatible 1000Base-T GBIC Copper Transceiver, D-Link compatible 1000Base-LX SFP bidirectional transceiver and D-Link Compatible 1000Base-LX SFP Transceiver which operates at a nominal wavelength of 1310 nm and is designed for single-mode fiber (SMF). GAO’s pluggable transceivers offer a convenient and cost effective solution for use in data centers, metropolitan area access and ring networks, and storage area networks.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Extreme Compatible 10GBASE-SR XENPAK Transceiver

September 13th, 2011 Posted inGAO Comm News

Toronto, Canada – GAO Comm has released its high performance 10GBASE-SR XENPAK compatible fiber optic transceiver for switches and modules that use XENPAK transceivers.

This high performance 10GBASE-SR XENPAK transceiver, model C018XX01, operates at a wavelength of 850 nm. It is hot Z-pluggable and features up to 10.3 GBd bi-directional data links and RoHS compliance.

The fully integrated 10.3 Gbit/s optical transceiver module consists of an 850 nm wavelength optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery (CDR). It uses an 850 nm VCSEL laser diode to achieve a transmission distance of up to 300 m over 50/125 multi-mode fiber (MMF). This transceiver also allows for MDIO and DOM and has SC connectors.

In addition, the transceiver is compliant with XENPAK Multi-Source Agreement (MSA) Rev 3.0. Its optical interface is compliant with IEEE802.3ae and 10GBASE-SR.

This high performance 10GBASE-SR XENPAK transceiver belongs to GAO’s family of Extreme compatible transceivers. This line includes a wide variety of Extreme compatible transceivers such as Extreme Compatible 1000Base-SX GBIC Optical Transceiver, Extreme Compatible 1000Base-LX SFP Transceiver which is designed for single-mode fiber (SMF) and operates at a nominal wavelength of 1310 nm, and Extreme Compatible 10GBASE-LR XENPAK Transceiver. GAO’s pluggable transceivers offer a convenient and cost effective solution for use in data centers, metropolitan area access and ring networks, and storage area networks. GAO’s portfolio of compatible transceivers offers a rich set of choices in terms of speeds, protocols, reaches and accepted transmission media.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Handheld Signal Level Analyzer

September 1st, 2011 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the release of its handheld signal level analyzer for CATV engineers and technicians to facilitate installation and testing of CATV systems.

This handheld signal level analyzer, model A0N00004, operates over a frequency range of 5 to 870 MHz and provides a level range of 30 to 120 dBμV at a high accuracy of ±1.5 dBuV (indoor temperature) or ± 2.5 dBuV (-10°C to 40°C).

It tests CATV signal levels in both channel (SCAN) and frequency (SPECTRUM) modes. In “SCAN” mode, it can scan up to 125 channels at a speed of 30 channels/min and store signal levels as well as record signal levels in internal memory for later analysis. In “SPECTRUM” mode, it can display spectrums and tests within the frequency range.

The analyzer is equipped with channel plan selection, channel amending, channel sorting and channel editing functions. It can measure CATV TILT, C/N, and trunk cable voltage effectively and accurately. It also has automatic off function to save power when not in use and stores 24 groups of scanned data (up to 100 channels per group).

Additionally, it has two RF F-Type input ports and can be powered by both DC 7.2 V/1.4 Ah rechargeable battery and AC 110/60 Hz to 220 V/50 Hz (±10%) allowing for continuously operation for longer than 3.5 hours on a single charge.

This handheld signal level analyzer belongs to GAO’s family of CATV Meters & Instruments. This line also includes TDR cable fault locator which is able to automatically locate and indicate the distance to many kinds of RF cable faults such as short circuits, open circuits or high resistance points, digital signal level meters, PCM channel analyzers, CATV analyzer and QAM analyzers which are widely used for CATV signal testing and are intended for analog and digital television network construction and maintenance.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags: