October, 2010

Ethernet Media Converter

October 27th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the release of ?its Plug and Play Ethernet media converter , which is compatible with the international network IEEE 802.3 standard. The media converter converts data signals between 10/100 Base-Tx and 100 Base-Fx fast Ethernet. It acts as a standalone unit or as a slide-in module to a converter rack or in a central wiring closet.

This Ethernet media converter, model 3305-1, with built-in remote diagnostic capability, utilizes unique switch chip design and boasts a 512KB SSRAM buffer and 2K MAC address list. It connects fiber cable to twisted cable segments easily and supports both full-duplex and half-duplex communications. The Ethernet media converter offers a data transmission distance of 2km to 20km and uses easy-to-read LEDs to diagnose operating status. Two power modules are embedded.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Visible Fault Locator Features Low Voltage Warning

October 25th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the release of a compact visible fault locator designed for the installation and maintenance of optical networks. It features low voltage warning and automatic power off for saving energy. The fault locator, model 811, is an ideal tool for use with an OTDR as it remedies the limitation of the dead zone of an OTDR. The locator is also suitable for both single mode and multi-mode fibers. This fault locator, also known as a visible red laser source, finds fiber faults in fiber jumpers, patch panels, enclosures, connectors and couplers. It uses visible light to indicate the location of fiber faults accurately from a macro bend point, break, problem coupler or connector or a mechanical splice that is not well aligned. The practical visible fault locator supports FC, ST and SC adaptors as well as CW and 2Hz alternative optical output modes.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Digital/Analog Signal Level Meter

October 22nd, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the release of its handheld digital/analog signal level meter. It includes functions for MER, BER, constellation, channel, carrier noise ratio and rail voltage testing and is commonly used for QAM.

This portable and rugged signal level meter, model 2007, features low bandwidth, fast processing speed, low static power consumption and high dependability. When conducting digital television channel measurement, it operates at a frequency range of 5MHz to 862MHz and provides DVB-C/ITU-T and J.83-AnnexA/B/C tuning modes; it also features adjustable bandwidth. When under analog television channel measurement mode, it offers a level measurement range of 25dBuV to 120dBuV at an accuracy of ±1.5dB. This rugged signal level meter is embedded with an integrated microprocessor and boasts an automatic battery voltage test function.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Portable and Shock-Resistant CATV Analyzer

October 19th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm has announced the availability of a portable CATV analyzer which is suitable for digital and analog mixed network testing and two-way network construction and transformation. It is specially designed for troubleshooting network problems and monitoring potential network security attacks. The rugged analyzer is equipped with a high-contrast, backlit LCD screen and incorporates a high interference immunity design to ensure that TV images are displayed at the best graphic quality.

This handheld CATV analyzer, model 783A, tests analog TV indexes, digital TV QAM modulation channel power, and MER and BER modulation using special circuitry. It offers both auto measurement and a slope measurement modes. This practical analyzer automatically obtains parameters including total number of channels, channel type (analog or digital), and channel spectrum in its auto-measurement mode. It can be easily connected to a computer or printer to save or print test data via data cable. In addition, this shock-resistant analyzer offers protection against harsh environments and works continuously for more than 16 hours on a single charge.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Dual-Wavelength Handheld Optical Light Source

October 14th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm has rolled out its dual-wavelength handheld optical light source that is well-suited for the installation, construction and maintenance of fiber optic projects, telecommunication and CATV systems. It offers highly stable output power and adjustable frequency.

This rugged fiber optic light source, model 08231, offers modulation frequencies of CW, 2Hz, 270Hz, 1kHz and 2kHz. It provides 1310nm and 1550nm dual-wavelength outputs for single-mode fiber measurement or 850nm to 1300nm for multi-mode fiber measurement. Equipped with a user-friendly interface, it provides a clear display of test results. The optical light source ships with a rechargeable battery and is powered via a 2.5mm FC/Universal adaptor. Overall, this easy-to-use light source is a perfect choice for field use due to its compact size and outstanding performance.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Multi functional Handheld xDSL Tester

October 12th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm is offering its handheld xDSL tester designed to test and analyze VDSL, ADSL, ADSL2 and ADSL2+ networks. It confirms whether a line is suitable for XDSL services and tests the physical, network and application layers at a high speed. Ethernet and cable tests can also be performed.

This compact xDSL tester, model V300, is capable of web browsing, web rate measurement and FTP speed measurement. It has the functions of a digital multi meter (DMM) such as testing loop resistance, insulation resistance, capacitance, AC-DC voltage and estimating wire length. Equipped with a PPPoE dial-up function, the tester can obtain an IP address and conduct Ping tests and looks for problems associated with IP broadband and LAN. Critical line threshold parameters can be set and compared to real test results to determine service qualification automatically. The tester has a Windows CE operating system with a graphical interface and a large memory capacity and can store up to 2000 ADSL test records.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags:

Handheld xDSL Tester Covers a Broad Range of Applications

October 10th, 2010 Posted inGAO Comm News

Toronto, Canada – GAO Comm is offering its handheld xDSL tester which is designed to test and analyze VDSL, ADSL, ADSL2 and ADSL2+ networks. It assists in confirming whether a line is suitable for XDSL services and also performs XDSL physical layer tests, xDSL network layer tests, xDSL application layer tests, Ethernet tests and cable tests. This light weight tester is an invaluable tool for the installation, maintenance and troubleshooting of any xDSL network.

This compact xDSL tester, module V300, features high accuracy, fast response time and a digital multi meter (DMM) which is used to test loop resistance, insulation resistance, capacitance, AC-DC voltage and estimate wire length. It verifies connectivity from user to ISP service provider and conducts network layer tests after dial-up, including Ping, Ipconfig, Route and Tracert. The tester is equipped with a large colorful TFT LCD screen supporting web browsing. It emulates a computer to test broadband IP lines or initiates PPPoE dial-up to test IP network connections and troubleshoot modem or computer problems. The tester performs PC emulation without an additional ADSL2+ or VDSL modem or a computer. Moreover, it has a Windows CE operating system and a large memory capacity and can store up to 2000 ADSL test records.

For? sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaocomm.com

Leave your comment »

 

Tags: