Toronto, Canada – GAO Comm has rolled out its innovative passive optical network (PON) power meter specially designed for the construction and maintenance of PON networks. The power meter is able to test PON networks using three standard wavelengths including 1310nm, 1490nm and 1550nm; it also has the ability to conduct burst mode signal testing at 1310nm. This portable meter measures and displays voice, data and video signal synchronously.

The PON power meter, model 805, features a rugged and waterproof design, auto backlight shut-off and real-time display. It sets the threshold value and calibrates the wavelength through management software. Ten groups of threshold values are offered for selection. This practical power meter saves 1000 records and uploads them to the management software. The data is protected to ensure the authenticity of the test results. What’s more, this meter is powered by a 2800mA rechargeable Lithium battery ensuring it to work efficiently for a long time.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit passive optical network (PON) power meter , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative visible fault locator suitable for both single mode and multi-mode fibers. The fault locator is a visible red laser source specifically used to find fiber faults in fiber jumpers, patch panels, enclosures, connectors and couplers. It uses visible light to indicate the location of fiber faults accurately from a macro bend point, break, problem coupler or connector or a mechanical splice that is not well aligned. This smart fault locator, model 811, has been widely used for the installation and maintenance of optical networks and is an ideal assistant for use with an OTDR as it remedies the limitation of the dead zone of an OTDR. It features low voltage warning and automatic power off for saving energy. The practical visible fault locator supports FC, ST and SC adaptors as well as CW and 2Hz alternative optical output modes.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visitvisible fault locator , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative innovative digital signal level meter which is specially designed for cable television technical personnel to use in the maintenance of digital, analog, FM or bilateral networks. This handheld device is packed with such functions as single-channel, multi-channel, all-band scanning, signal-to-noise ratio (SNR, S/N) measurement, and spectrum and frequency analysis.

The digital signal level meter, model1129D, boasts a full-color TFT LCD screen and displays signal levels in a bar-graph with digital numeric readout ensuring a clear view of test results. It features a durable and portable design, easy keypad operation, high accuracy and a quick response time without requiring warm up. The meter performs auto channel spectrum scanning, limit testing and auto testing and supports USB and RS-232 connection. This full-featured meter operates over a wide frequency band of 5 to 870MHz and offers signal level measurement range of 30dBμV to 120dBμV at a precision level of ±1.5dB. It allows direct entry to a channel or frequency tuning selection and provides great flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit innovative digital signal level meter, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative serial USB channel buffer which is designed for the accumulation and delivery of data. It accumulates data from devices via RS-232 interface and downloads data to a computer via a USB port. The compact buffer supports transfer rates of 1200bps, 2400bps, 4800bps, 9600bps, 14400bps, 19200bps, 38400bps and 57600bps in data acquisition mode.

This serial channel buffer is shipped with data control software that allows for flexible setting and adjustment of all data parameters. It supports a built-in flash memory capacity of 16MB. An LED indicates its status and free memory of the buffer. The USB serial channel buffer has low power consumption and does not require an external power source as it is powered through a COM or USB port. GAO Comm’s optimized buffer runs under Windows 98/ME/NT/2000 operating systems.

Please visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit serial USB channel buffer, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative fiber optic power meter which conducts absolute and reference tests over a power range of -70dBm to 10dBm. This handheld fiber optic power meter features three modulated signal generation, auto-wave recognition, low-power consumption, a large LCD screen and superior source stability. The three modulated signal frequencies are 270Hz, 1kHz and 2kHz. Itsauto-wave recognition function saves test time and decreases potential errors. These features make the optical power meter an ideal tool for field testing.

GAO Comm’s fiber optic power meter, model 560, works over a wavelength range from 800nm to 1700nm. Calibrated basic wavelengths are 850nm, 1300nm, 1310nm and 1550nm. Its moveable connector allows for several types of connections including FC and SC. The handheld fiber optic power meter can be used in conjunction with different optical devices such as an optical light sources (OLS) or a visual fault locators (VFL) to allow optical network professionals to test fibers at different wavelengths at the same time. Furthermore, the optimized power management with an auto-off function allows more than 200h operation.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit fiber optic power meter , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative mini fiber optic power meter designed for CATV engineers and technicians working on single-mode fiber optic cables, CATV networks, or local networks. It is also an ideal tool for the debugging and maintenance of telecommunication networks. This compact power meter tests optic power within the wavelength range of 780nm to 1700nm.

This mini fiber optic power meter, model 3026, is equipped with a large character LCD screen, which makes it easy to monitor the processes of measurement and testing. It weighs less than 200g and has a rugged housing. The easy-to-use fiber optic power meter provides FC, SC, and ST connectors and supports continuous operation of more than twenty hours when it is fully charged. In addition, this fiber optic power meter offers a quick response without requiring warm-up and consumes little power due to its auto-off function.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit mini fiber optic power meter , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative portable network testerthe ?– a sophisticated combination of many advanced testing instruments such asa Time-Domain Reflectometer (TDR) module and a Digital Multimeter (DMM) module. The price has been reduced to US$1,999.00 for a limited time. This highly rugged network tester boasts functions such as wiring diagram test, network test, PPPoE dialing and DMM test; the wiring diagram test function aims to validate cable link sequence. It supports network layer tests such as Ping, IPconfig, Tracert, and Route. This portable unit is an ideal solution to openfor the installation and to maintainenance of the xDSL operations.

GAO Comm’s practical network tester, model 321, tests the cable length, and breaks within a maximum distance of 150m. It also conducts other tests such as AC or DC voltage, line capacitance, and line insulation. With a color TFT LCD screen, it gives clear and accurate display of test results. This network tester works with various types of? both shielded and non-shielded cables including CAT5, CAT5E and CAT6. Its embedded software is able to automatically ?has the ability to upgrade toto the latest version. In addition, this portable network tester provides has a memory capacity of 20MB and allows users to download test results directly to a PC or a USB diskdrive.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

digital display

For more information about this product please visitportable network tester, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative optical light source which is an ideal solution for fiber optic networks especially when used together with GAO’s optical power meter: LP-216. This optical light source is able to simulate various conditions in the manufacture, testing and maintenance of passive optical components. It is used for the maintenance of telecom, CATV, fiber optic test labs, and generic cabling systems (GCS).

?
This easy-to-use optical light source, model LP-226, provides two to four output wavelengths at a and highly stable output power; the output stability is ±0.05dB/15mins and ±0.1dB/8h. The output wavelengths is are 650nm red source, 1310/1550nm wavelength for the single mode fiber and 850/1300nm wavelength for multimode fiber. This lightweight light source provides FC/PC optical connector; FC, SC and ST connectors are optional. It also offers switchable modulation frequencies including CW, 270Hz, 1kHz and 2kHz. In addition, tIt tinhe compact light source boasts a FP-LD emitter and a large LCD screen.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit optical light source, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative digital/analog signal level meter intended for QAM digital/analog signal measurement. It is used to measure power, MER, BER, constellation, channel, carrier noise ratio and rail voltage. This optimized signal level meter features fast processing speed, low power consumption and high dependability.

GAO Comm’s sophisticated digital/analog signal level meter, model 2007, operates over a wide frequency range from 5MHz to 862MHz with a resolution of 10kHz. It includes DVB-C/ITU-T and J.83-AnnexA/B/C tuning modes and supports 16/32/64/128/256 QAM and is able to simultaneously scan 150 channels at most. The level measurement range is 25dBuV to 120dBuV at an accuracy of ±1.5 dB. This highly rugged meter offers an automatic power saving function and an automatic battery voltage test function and can be used continuously for 4 hours when fully charged.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visitdigital/analog signal level meter , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative single fiber fusion splicerfeaturing digital color display, a built-in large capacity battery, and simultaneous X and Y views. Fusion splicing is preferred over mechanical splicing for its inherent durability and strength. This practical fusion splicer is intended to splice single mode (SM) or multimode (MM), dispersion shifted (DS), non-zero dispersion shifted (NZDS), and erbium doped fibers (EDF) in the construction and maintenance of fiber optic networks.

This single fiber fusion splicer, model 720B, requires only a nine second splice time and 45s tube-heat time. The average splice loss is 0.02dB, 0.01dB, 0.04dB and 0.04dB respectively for SM, MM, DS and NZDS fibers. The splicer automatically adjusts to environmental conditions using built-in temperature, humidity and pressure sensors that provide constant feedback signals to control the fusion arc temperature. The user programmable single fiber fusion splicer automatically checks the fiber end face andcalibrates parameters. It has a RS232 interface for communication and is able to store 8000 groups of splice results . In addition, the splicer supports up to 150 times continuous splices and heats.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visitsingle fiber fusion splicer, or contact sales@gaocomm.com.