Toronto, Canada – GAO Comm has rolled out its innovative IPTV tester specifically designed for FTB-8510B and IQS-8510B Packet Blazer? Ethernet test modules and CoLT-450P triple-play handheld test equipment. This IPTV tester based on the CoLT-450P platform is intended to meet the specific testing challenge rising from growing popularity of IP-based applications. It has been widely used for the installation, maintenance and troubleshooting of IPTV and Internet services.

GAO Comm’s easy-to-use IPTV tester introduces QoS measurements including media delivery index (MDI), PCR Jitter and PID viewer. It conducts IP video, audio and data service testing, as well as ADSL1, ADSL2, ADSL2+ and SHDSL connection rate assessment. This advanced IPTV tester combines golden modem with router functions and provides for comprehensive analysis of all layers involved in data transmission; it also has lightning-fast auto-test capabilities. The high performance IPTV tester is an ideal solution for triple play testing. This improvement allows field technicians to fully test IPTV and Internet services in “Through” mode, or to use the test equipment to emulate certain capabilities of multiple set-top boxes (STBs) when access to customer premises is not available.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit IPTV tester , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative Plug and Play Ethernet media converter used as a standalone unit or as a slide-in module to a 19-inch converter rack or a central wiring closet. It is compliant with the international network IEEE 802.3u standard. The media converter is designed to convert data signals between 10/100 Base-Tx and 100 Base-Fx fast Ethernet and extends the transmission distance limited by copper wire.

The Ethernet media converter, model 3305-1, with built-in remote diagnostic capability, uses a unique switch chip design. It easily connects fiber cable to twisted pair and supports both full-duplex and half-duplex communications. Broadcast filtering, including auto-learning and auto-update function, and a store-and-forward mechanism are available. Additionally, the converter boasts a 512kB SSRAM buffer and a 2k MAC address list and also provides optional fiber connectors: SC/PC and FC/PC.

Visit http://www.GAOComm.com for more information or to purchase this product online.

For any sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit Plug and Play Ethernet media converter, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative multi-functional ADSL tester intended for the installation, maintenance and measurement of ADSL/ADSL 2+ applications. This powerful test unit provides test functions including upstream or downstream rate measurement, error count, DMM, MODEM simulation, and ping and trace testing. Its handheld design, simple operation and powerful functionality make the tester an invaluable tool for ADSL/ADSL 2+ technicians.

This ADSL tester, model 2045, offers a high resolution backlit LCD screen and displays ADSL line connections on a real-time basis. It determines the type of an ADSL line being tested, automatically matches ADSL line standards and implements tests accordingly. Measurement is carried out immediately with a simple push on the “Auto Test” key; test results can be uploaded, saved and printed through Test Manager Pro Software included. It supports a maximum transmission distance of 6.5km. The embedded software of the ADSL tester is upgradable via an integrated RS-232 interface.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit multi-functional ADSL tester, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative optical electric signal level meter supporting operation on 1310nm and 1550nm wavelengths and is appropriate for HFC network applications. This highly portable meter displays constellation diagrams and optical pictures and conducts measurements of DVB signals, optical fiber signals and EVM.

The digital optical electric signal level meter, model 2112AX, includes a video input port and an audio input port. It can measure both forward directional signals and reverse directiossnal signals. TV pictures and measurement results of analog channel level, V/A, C/N, TILT and spectrum are shown on a TFT 5” LCD screen. It also conducts digital signal tests on digital signal power, power/Hz and QPSK signal power. All these attractive features make it an excellent signal level meter.

Visit http://www.GAOComm.com for more information or to purchase this product online.

For any sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit optical electric signal level meter, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative visual fault locatorfeaturing a small, light-weight pen-shaped design. This visual fault locator, model 3C-04, is commonly used for fiber optic identification and fault location on single mode or multi-mode fiber. It can also be used for wavelength loss testing. The high power, 650nm laser can transmit continuous light or adjustable strobe light. This compact locator has a measurement range of up to 5km and detects breaks and micro-bends even in jacketed fibers. It easily identifies cuts in fiber patch cords and ribbons or bunched pigtails. This fault locator is an ideal tool for the maintenance of fiber optic networks, LAN, FDDI, ATM optical systems, telecommunications and CATV networks.

Visit http://www.GAOComm.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit visual fault locator, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative handheld E1 BER testerwith built-in Ni MH rechargeable batteries and smart charger circuitry. The BER tester is an advanced test instrument used for E1 PCM line access, maintenance, inspection and acceptance testing. It also can be deployed in R&D, production, installation and maintenance of SDH, PDH and DATA protocol conversion.

The E1 BER tester, model 5853, supports out-of-service framed and unframed testing; it also offers BER testing and signal analysis. The easy-to-use tester conducts clock slip measurement, frequency and level measurement. The BER tester can perform tests manually or by using auto-timers. The tester provides extensive error detection and indication such as real-time transmission circuit open/short indication. It works continuously for up to six hours on a single charge and can be charged with an automobile battery adapter. The E1 BER tester uploads, saves and prints test results for analysis via Test Manager Pro? software. It possesses a large memory capacity and saves/recalls up to ten user-defined setups and ten sets of results. This multi-functional E1 BER tester boasts a high resolution LCD and uses smart navigation mode menus and is shipped with upgradable software.

Visit http://www.GAOComm.com for more information or to purchase this product online.

For any sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visithandheld E1 BER tester , or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative handheld signal level meter a portable device operating in a frequency range of 46MHz to 870MHz. It is specially designed and manufactured for CATV systems installation and testing. This meter is commonly used to test CATV signal levels in both channel and frequency modes. As a measurement instrument, this handheld meter is especially useful for CATV stations due to its ability to simultaneously display two channels. It is ideally suited for the maintenance of digital, analog or bilateral networks.

This multi-functional signal level meter, model 828B, offers a quick response without requiring warm-up. The easy-to-carry signal level measures parameters such as CATV TILT, C/N, and trunk cable voltage efficiently and accurately. It displays all test results clearly on a large character TN LCD screen. This level meter features a portable and rugged design, high-speed measurement and simple operation, which makes it one of the most popular instruments for general and integrated applications.

Visit http://www.GAOComm.com for more information or to purchase this product online.

For any sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visithandheld signal level meter, or contact sales@gaocomm.com.

Toronto, Canada – GAO Comm has rolled out its innovative fiber optic digital video transceiver module– an all-digital device which is designed to support the transmission of two-way video over one optical fiber. The all-digital fiber optic video transceiver module is commonly used in closed-circuit TV (CCTV) monitoring systems. Its hot-pluggable design and wide dynamic range provide convenience for installation, maintenance and operation.

This fiber optic digital video transceiver module, model GFS110, uses 10-bit/20MHz sampling technology for video digital encoding ensuring the quality of signal transmission. It supports NTSC, PAL and SECAM video formats; the data returns to the module through RS232, RS422 or RS485 interface. The GFS110 digital video transceiver is available in either stand-alone or rack mount card versions and requires no electrical or optical adjustments in field operations. ?Additionally, the transceiver ensures proper system operation in complex electromagnetic environments.

Visit http://www.GAOComm.com for more information or to purchase this product online.

For any sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

For more information about this product please visit fiber optic digital video transceiver module, or contact sales@gaocomm.com.