GAO COMM Inc.
 
A Member of GAO Group - Celebrating 15 Years of Innovation
  HomeFAQShippingAbout UsContact UsNewsCareer
   
 

4-Channel Automotive Tester/Diagnostic Oscilloscope
GAO A0E20001

US$839.00
Contact Us

PDF for

Overview - 4-Channel Automotive Tester/Diagnostic Oscilloscope

This 4-channel, 60 MHz automotive diagnostics oscilloscope has a wide input voltage range from 8 to 36 V, making it suitable for vehicle power tests. It has vehicle diagnosis functions; more than 20 kinds of automatic measurement functions, automatic cursor tracking measurements, as well as, fast Fourier transform (FFT) spectrum analysis. It is powered directly from the USB port of a computer, so this kit can be used either in the workshop or on the road to test and measure virtually all of the electrical and electronic components and systems in motor vehicles.

Key Features - 4-Channel Automotive Tester/Diagnostic Oscilloscope

  • 4 Channels and EXT trigger, 60 MHz Bandwidth
  • Plug and play, no external power required
  • 200 MS/s real-time sampling rate, 10 kb to 16 MB memory depth per channel
  • 8 to 36 V input voltage, suitable for vehicle power tests
  • USB 2.0 interface, LAN and WIFI are optional
  • More than 20 kinds of automatic measurement functions, PASS/FAIL check functions
  • Built-in fast Fourier transform (FFT) spectrum analysis
  • Compatible with Windows NT/2000/XP/Vista and Windows 7

Standard Accessories - 4-Channel Automotive Tester/Diagnostic Oscilloscope



















Optional Accessories - 4-Channel Automotive Tester/Diagnostic Oscilloscope



Optional Power

LAN PCB

WIFI PCB

Auto High-Pressure Ignition Probe

Attenuator

Needle

Test leads

Coil-on-Plug extension leads

Break Out Leads

AC DC Current Clamp (CC-65)

AC DC Current Clamp (CC-650)

AC DC Current Clamp (CC-1100)

Multimeter Probes

Large Dolphin Gator Clips

Functions - 4-Channel Automotive Tester/Diagnostic Oscilloscope


Vehicle diagnosis

  • Ignition (primary and secondary)
  • Injectors and fuel pumps
  • Starter and charging circuits
  • Batteries, alternators and starter motors
  • Lambda, Airflow, knocks and MAP sensors
  • Glow plugs / timer relays
  • CAN bus, LIN bus and FlexRay

Technical Specifications - 4-Channel Automotive Tester/Diagnostic Oscilloscope


Input
Max. Sample Rate
200 MS/s (Single Channel)
100 MS/s (Dual Channels)
Channels
4 Channels
Bandwidth
60 MHz (-3 dB)
Vertical Resolution
8 bits/channel
Gain Range
10 mV to 5 V/div at x 1 probe(10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V/div1, 2, 5 sequence)
100 mV to 50 V/div at x 10 probe
1 V to 500 V/div at x 100 probe
10 V to 5 kV/div at x 1000 probe
200 mV to 100 V/div at 20 : 1
Range
8 divisions
Offset Level
4 divisions
Coupling
AC, DC,GND
Offset Increments
0.02 div
Impedance
1 M ohm
DC Accuracy
3%
Input Protection
35 Vpk (DC + peak AC < 10 kHz, without external attenuation)
Display Mode
Y-T, X-Y
Time Base
Time Base Range
5 ns/div to 1000 s/div(1-2-5 sequence)
Acquisition Mode
Real time sampling: 5 ns /div to 200 ms/div.
Roll mode: 500 ms/div to 1000 s/div
Range
10 divisions
Buffer Size
10k to 16M points (Single Channel)
Trigger
Type
Edge trigger, Pulse trigger
Mode
Auto, Normal and Single
Auto Set
Yes
Range
10 divisions
Trigger Level
4 divisions
Stability
0.02 div increments
Math
Measurements
Vpp, Vmax, Vmin, Vmean, Vrms, Vamp, Vtop, Vbase, Vmid, positive overshoot, negative overshoot, cycle mean, cycle RMS, period, frequency, positive pulse width, negative pulse width, rise time (10%~90%), fall time (10% to 90%), positive duty cycle, negative duty cycle
Math
Addition, Subtraction, Multiplication, FFT
FFT
Rectangular, Hanning, Hamming, Blackman Window
Physical
Interface
USB2.0 (USB1.1 compatible)
Power
External power source required(8.5 v dc)
Dimensions
224 mm x 168 mm x 37 mm
Weight
1 kg

Other Pictures - 4-Channel Automotive Tester/Diagnostic Oscilloscope

















 | Home | FAQ | Shipping Info | About Us |  Site Map | News |