Overview - 3Com Compatible 1000Base-ZX GBIC Transceiver (3CGBIC97)
This hot-pluggable GBIC transceiver is fully compatible with original 3Com transceivers with a 1550 nm operating wavelength for single mode fiber (SMF). It is compliant with GBIC interface converters specifications Rev. 5.5 as well as Gigabit Ethernet standard as specified in IEEE 802.3. This optical transceiver consists of two sections: the transmitter section incorporates an advanced DFB laser and the receiver section contains an InGaAs/InP PIN photodiode integrated with a trans-impendence preamplifier (TIA). In addition, the optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
Key Features - 3Com Compatible 1000Base-ZX GBIC Transceiver (3CGBIC97)
- Up to 1.25 Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- 1550 nm DFB laser transmitter
- Duplex SC connector
- Low power dissipation
- Metal enclosure for lower EMI
- Up to 80 km on 9/125µm SMF
- Compliant with IEEE 802.3z Gigabit Ethernet standard
- Compliant with Gigabit interface converter specification Rev. 5.5
- RoHS Compliance
Technical Specifications - 3Com Compatible 1000Base-ZX GBIC Transceiver (3CGBIC97)
Data Rate
| 1.25 Gbps
|
Wavelength
| 1550 nm
|
Fiber Type
| SMF
|
Connector Type
| SC
|
Transmission Distance
| 80 km
|
Power Supply
| +5 V
|
Operating Temperature
| 0 °C to 70 °C
|
