Overview – Fiber Optic Digital Video Transceiver ModuleThis fiber optic digital video transceiver is an all-digital module designed to support simultaneous transmission of the one-way video, one-way audio and one-way data over one optical fiber. This fiber optic digital video transceiver uses 10-bit/20MHz sampling technology for video digital encoding, and 24bit/48kHz sampling technology for audio digital encoding. It incorporates an LED indicator for monitoring system operations and provides BNC video connection, ST optical connection and DB9 data connection.
Key features – Fiber Optic Digital Video Transceiver Module- Compatible with NTSC, PAL and SECAM video formats
- Supports RS232,RS422,RS485
- Hot-plugging design
- Convenient installation, maintenance and operation
- Uses 10-bit/20MHz video sampling technology and 24bit/48KHz audio sampling technology
Technical Specification – Fiber Optic Digital Video Transceiver ModuleVideo Bandwidth
| 0 to 6.5MHz
|
Differential Gain
| 1% (typical)
|
Differential Phase
| 0.8 (typical)
|
Field Tilt
| 0.5% (maximum)
|
Signal-to-Noise Ratio(SNR)
| 67dB
|
Input /Output Impedance (Video)
| 75Ω (unbalance)
|
Input / Output Level
| 1.0Vpp (typical)
|
Input Impedance (Audio)
| 600Ω (unbalance)
|
Output Impedance (Audio)
| 10oΩ (unbalance)
|
Frequency Response
| 0.5kHz to 20kHz
|
Input / Output Level
| 0dBm (typical)
|
Data Interface
| RS232/RS422/RS485 ( optional)
|
Data Rate
| 0 to 100kbps
|
Error Rate
| 10-9
|
Wavelength
| 1310nm/1550nm
|
Connectors
| ST
|
Data Connector
| DB9
|
Operating Temperature
| -40°C to 50°C
|
Operating Humidity
| 0 to 95% (non-condensing)
|
Storage Temperature
| -40°C to 65°C
|
Mean Time Between Failures
| 100,000 hours
|
Dimensions ( Standalone)
| 175mm × 150mm × 65mm
|
